Gps Monitor - Furuno FA-150 Operator's Manual

3.7

GPS Monitor

The GPS monitor display shows information about the built-in GPS receiver,
including position, speed over ground, course over ground, date, time, mode
position accuracy, position-fixing status and RAIM status.
1. Press the MENU key to open the menu.
2. Select INTERNAL GPS then press the ENT key.
Longitude position
Speed over ground, Course over ground
Position Accuracy
H: High (<10 m, differential mode)
L: Low (>10, autonomous mode)
3. Press the DISP key to close the display.
Latitude position
Date
Time
Mode
DGPS
GPS
NO FIX
*RAIM: Technique whereby the GPS receiver verifies the integrity
of the signals received from the GPS constellation.
3. MAINTENANCE, TROUBLESHOOTING
[INTERNAL GPS]
: 34 ° 44.4639'N
LAT
LON : 135 ° 21.2395'E
98.9 °
S/C : 10.9 kn/
UTC : 16/MAY/2009
06:29:02
DGPS STS: D3D
PA: H RAIM: USED
RAIM Status*
(Receiver Autonomous
Integrity Monitoring)
USED or UNUSED
STS (Position fix Status)
2D:
2D GPS position fix
3D: 3D GPS position fix
D2D: 2D DGPS position fix
D3D: 3D DGPS position fix
DOP: HDOP > 4 in 2D fix,
or HDOP > 6 in 3D fix
NO FIX: No position fix
3-11