Motion Control Engineering 2000 Manual page 22

Motion 2000 TSSA Description
HC-CTL-2 Main Control Board
door operation.
board is responsible for inspection, fire service, landing system, door lock bypass and lanterns
and gongs. For more information
CE Fixture boards with LON interface
nal fixtures are required.
MC-CPI or ICE-COP-2 Car Panel Interface Board
Discrete closures from car panel buttons and switches to CAN data and passes it through the
Landing System Interface board (MC-LSI) to the car controller or dispatcher
Car Panel Interface Board" on page
MC-LSI Landing System Interface Board
point for the Car Panel Interface board (MC-CPI or ICE-COP-2). A shielded external CAN con-
nection runs from the MC-LSI board, through the traveler, to the Motion 2000 controller
"Example: MC-CPI Wiring" on page
1-8 Manual # 42-02-1P21
Please refer to "HC-CTL-2 Main Control Board" on page
see "HC-CTL Control Board" on page
6-60).
6-67).
Monitors I/O, performs safety functions and front
(not shown) Used when extensive exter-
(not shown) Provides a connection
1-7. The HC-CTL-2
6-40.
(not shown) Converts the
(see "ICE-COP-2
(see