Four Speed Wiring - QuietCool TRI PRO-1.5 Owner's Manual

5. Begin wiring the fan by opening up the handy box. Take off the wire nuts within the handy box.
Unscrew the green ground wire from the handy box. Detach the green ground wire from the power
cord. Remove the power cord. Re-attach the ground screw and wire to the handy box. Cut your
green ground wire in half and strip both sides. (see Figure D)
6. Feed the 3 wire Romex into the handy box. Using the included wire nuts, tie the black wires together
for high speed. Tie the red wires together for low speed. Tie the remaining white common wires
together. Tie your bare copper wires and green ground wires together.
7. Carefully reinstall the handy box cover.
Figure D
Whole House Fan Whole House Fan
4-3 Four Speed Wiring (for TRI PRO-6.5)
1. For this installation, you will need (2) 2 wire Romex and (1) 3 wire Romex, double-gang retrofit box, an 8
Hour Timer, and a Double 3-Way Combination Switch.
2. Using the 3 wire Romex from the first fan motor head, attach the black wire to the 4th gold screw on
the right and the red wire to the 3rd gold screw on the right of the switch. Using the 2 wire Romex
from the second fan motor head, attach the black wire to the 2nd gold screw on the switch. Attach
the red wire from the 8 Hour Timer to the bottom black screw on the switch. (see Figure F)
3. Using the 2 wire Romex from your power source, tie the black wire to the black wire on the timer with
a wire nut.
4. Take a piece of bare copper wire and attach it to the green ground screw on the switch. Using a wire
nut, tie all copper wires together with the green ground wire from the timer. Tie all the white common
wires together. Finish the installation of your switches and switch cover plate.
16
Tie All Ground & Bare Copper Wires Together Tie All Ground & Bare Copper Wires Together
Common Wires Together Common Wires Together
Red Wires Together Red Wires Together
14-3 Wire 14-3 Wire
All Black Wires Together All Black Wires Together
QUIETCOOLSYSTEMS.COM