Wiring; Single Speed Wiring - Qc Stl Pro-1.5X - QuietCool STEALTH PRO-1.5X Owner's Manual

4. WIRING AND CONTROLS
NOTE: Wiring Diagrams are for examples ONLY. Wiring should be done by an
! !
experienced electrician.
NOTE: Your fan came pre-wired to a power cord for testing purposes before installation. If you
! !
would like to hard-wire the fan, or it is required by your local building codes, please follow the
wiring instructions below.
4.1 SINGLE SPEED WIRING (FOR QC STL PRO-1.5X)
1. For this installation, you will need (2) 2 wire Romex, and an 8 Hour Timer. Using the included
wire nuts, tie the black wire from the first 2 wire Romex from the power source to the black wire
on the timer. (see Figure 4.1A)
2. Using a wire nut, tie the black wire on the 2 wire Romex from the fan to the red wire on the
timer.
3. Using a wire nut, tie the bare copper wires together with the green ground wire on the timer.
4. Using a wire nut, tie the white neutral wires from the Romex to the white neutral wire on the
timer.
Figure 4.1A
Power Source
QUIETCOOLSYSTEMS.COM
Whole House Fan
Tie White Common
Wires Together
Tie Ground & Bare
Copper Wires Together
Black Tied
Together with Black
8 HOUR
4 HOUR
2 HOUR
1 HOUR
HOLD
Red Switch Leg
Single Speed Wiring
13