Installation; Installing Quietcool - QuietCool TRI PRO-1.5 Owner's Manual

3. INSTALLATION

TOOLS YOU WILL NEED
- Drywall saw
3-1

Installing QuietCool

NOTE: Be sure to plug in your fan before attempting
to install to ensure that the fan is operational and
the fan blade spins freely.
Installing the QuietCool system is very easy.
Simply follow the steps given below:
1. Determine from down below in which areas you
would like to install your QuietCool fan. Go up into
the attic to mark the exact location for the fan. Make sure you
have a minimum of 30" of clearance. Take the cardboard cut-
out template and a small screwdriver with you. Make sure the
template fits between the framing.
The template size varies depending on which model of QuietCool
fan you are installing:
TRI PRO-4.8 & TRI PRO-5.5
2. When you have chosen your exact spot, place the provided
template on the spot and mark it at each corner by pushing
the screwdriver through at each corner to make a hole so
that you can find it from below.
8
- Phillips screwdriver
QuietCool Fan Model
TRI PRO-1.5
TRI PRO-2.5
TRI PRO-3.3
TRI PRO-6.5
- Pencil - Power-drill
Installation Video:
Watch the video by
scanning the QR
code or visit
QuietCoolSystems.com/
support
- Philips bit
www.
Template Size
14-1/4" x 14-1/4"
14-1/4" x 18-1/4"
14-1/4" x 22-1/4"
14-1/4" x 30-1/4"
14-1/4" x 36-1/4"
QUIETCOOLSYSTEMS.COM