Table of Contents
Advertisement
Wireless Mode
Many models of the GRAFIK Eye
other Lutron
products. This feature allows for easy integration of wireless sensors,
®
keypads, remotes, and window treatments for single-room wireless applications.
Units supporting wireless communication are labeled "GRAFIK Eye
the front label of the unit.
The wireless feature of the GRAFIK Eye
of operation.
• Disabled: Use for wired-only systems.
• Enabled: The GRAFIK Eye
commands from nearby Lutron QS wireless (and compatible) products.
• Ignore Programming (default): The GRAFIK Eye
respond to normal operation commands from wireless devices associated while in
Enabled mode.
Changing the wireless mode of the GRAFIK Eye
1. Enter programming mode.
Main menu
2. Use the Master buttons to highlight "Wireless Mode" and press
Shade labels
the OK button to accept.
Wireless Mode
3. Use the Master buttons to highlight the desired wireless mode,
and press the OK button to accept.
4. The info screen will display a confirming "Saved" message.
Wireless Mode
5. Exit programming mode.
Enabled
Note: The wireless signal has a range of 9 m through standard
Saved
Saved
®
QS control unit support wireless communication with
®
QS Wireless control unit has three (3) modes
®
QS Wireless control unit will respond to any programming
®
QS Wireless control unit will only
®
QS Wireless control unit:
®
construction or 18 m line of sight.
For additional information, see the complete installation and operation guide at www.lutron.com/qs
QS Wireless" on
®
GRAFIK Eye
QS Control Unit Quick Installation and Operation Guide 11
®
Master
buttons
OK
OK
button
Timeclock
(back) button
Advertisement
Table of Contents
