Kanomax Climomaster S-6531-0E User Manual page 26

<READY>
■ Humidity is only
available on
MODEL6531/6533.
■ Air temperature is
only available on
MODEL6531/6541
/6542/6533/6543/
6561.
■ Pressure is only
available on
MODEL6501-B0
<While Measuring>
/-C0.
<RESULT>
24 Measuring Max, Min, and Mean: CALCULATION Mode
actoolsupply.com
'12/04/12a15:40:23 ~
0.87f
RDY.
25.3e
N2221
/2250
64.1g
'12/04/12a15:42:57 ~
2.11f
SMP .
25.3e
N2223
/2250
64.2g
2222CALCULATION
2.76f
MAX
1.43f
AVG
0.81f
MIN
*If you measured Pressure, only Pressure will be displayed.
Press to return to the setup menu of the CALCULATION Mode.
Press to return to the Main Menu. If YES is selected for "DATA
STORAGE", the results will be stored.
Related Functions:
■ If a printer is connected, press
■ To recall stored data → P. 31
■ Print out → P.34
■ What is Dew Point Temperature (DT) and Discomfort Index (DI)?
→P.55
actoolsupply.com
The instrument is ready for measuring.
Press to change the applied
parameters. (Air Velocity, Air Temp,
Humidity – Flow Rate, Air Temp,
Humidity – Pressure)
Press to start.
Press to stop.
If you have selected "YES" for "4. DATA
STORAGE?", the measured data will be
stored.
Pressing will also stop the
measurement but the data will not be
saved.
After all the trials are finished, the
calculated results will be displayed.
Press to check each parameter
in the following sequence: Air Velocity
(or Air Flow)  Air Temp.  Humidity 
Dew Point Temperature (DT),
Discomfort Index (DI).
to print out the results.