Kanomax Climomaster S-6531-0E User Manual page 23

Changing the Time Constant Application
■ Pressure is only When you first turn on the instrument, the Time Constant is only
available on
effective for AIR VELOCITY and AIR FLOW in Normal Mode. If you
MODEL6501-B0
want to make it effective for AIR TEMPERATURE, HUMIDITY and
/-C0.
PRESSURE, the following change must be made.
MENUaa1.NORMAL
aaaaaa2.DUCTaTYPE
aaaaaa3.CALCULATION
aaaaaa4.FLOWaRATE
aaaaaa5.DATAaOUTPUT
aaaaaa6.DATAaCLEAR
aaaaaa7.UTILITY
aaaaaa8.PRESSUREaZERO
aaaaaaaUTILITY
oooooooUTILITY
1.TIME AJUST
1.TIMEoADJUST
2.UNIT SELECT
2.UNIToSELECT
3.ANALOG OUTPUT
3.ANALOGoOUTPUT
4.TC(T.H.P) SET
4.TC(T.H.P)oSET
5.BACKLIGHToON/OFF
1.TC(T.H.P) SET
2.SAVE INFO
<Save the Settings>
1.TC(T.H.P) SET
2.SAVE INFO
*P indicates Pressure (MODEL6501-B0/-C0).
*T indicates Air Temperature (MODEL6531/6541/6542/6533/6543/6561).
*H indicates Humidity (MODEL6531/6533).
actoolsupply.com
TC(T.H.P) SET
YES
TC(T.H.P) SET
NO
If you press before saving the settings you will return back to
the Main Menu and any setting changes you made will not be saved.
actoolsupply.com
Press to enter the Main Menu.
Use and select "7. UTILITY".
Press .
Use and select
"4. TC(T.H.P) SET". Press
*If your instrument does not have the
optional pressure sensor, the screen will
display "4. TC(T.H)".
Select "1. TC(T.H.P) SET" and press
. Use to select YES or NO.
Press .
YES: The time constant is effective for
all parameters in Normal Mode.
NO: The time constant is only effective
for the AIR VELOCITY and FLOW RATE.
Use to select "2. SAVE INFO".
Press to save the new settings
and go back to Main Menu.
.
21