Install The Ip Multiline Telephone (Ip4Ww-24Tixh-C1 Tel); System Connection; Installing The Ip Multiline Telephone; Figure 2-106 Ip Multiline Telephone Connection - NEC SL1100 Hardware Manual

SL1100

5.2 Install the IP Multiline Telephone (IP4WW-24TIXH-C1 TEL)

5.2.1 System Connection

The IP Multiline Telephone is connected via HUB.
KSU
VOIPDB-C1
board (CN1)

5.2.2 Installing the IP Multiline Telephone

1. Connect the LAN Network 10Base-T/100Base-TX cable to the LAN(=) connector.
2. If the Power feeding is used by AC[ ]-[ ] UNIT, plug the AC[ ]-[ ] UNIT cable to the DC input jack
on the IP Multiline Telephone Base.
3. The IP Multiline Telephone has a Switching HUB to connect a PC to the LAN Network. Connect
the 10Base-T/100Base-TX straight cable used for connection to the PC to the PC(X) connector
and to the PC.
2-72
LAN Cable
(10BASE-T/100BASE-TX)
Ferrite Core
Hub
Commercial Power

Figure 2-106 IP Multiline Telephone Connection

PC(X) LAN(=)
< Bottom view>

Figure 2-107 IP Multiline Telephone Connectors

IP Multiline Telephone
Exit
LAN(=) Connector
PC (X)Connector
PC
Commercial Power
PC(X) LAN(=)
ISSUE 4.1 (R5.1)
Help
ABC DEF
Flash Transfer
1 2 3
GHI JKL MNO
Mute DND
4 5 6
PQRS TUV WXYZ
Clear/Back
7 8 9
0
Speaker
Hold
AC[ ]-[ ]
UNIT
Installation