Figure 2-5 Screw Positions; Figure 2-6 Sub-Cover Slide-Out - NEC SL1100 Hardware Manual

ISSUE 4.1 (R5.1)
2. Install four screws into the wall. The screw heads must stand off from the wall about 2.5 mm
(0.098") to 3.5 mm (0.138").
• Wall-Mounting Screws (M4.1x 25: 4 pcs) are attached to the KSU.
• The screw diameter is 4 mm (0.158") to 4.5 mm (0.177").
3. Push the center of the Sub-Cover and slide it outward.
Hardware Manual
285 mm (11.221")
285 mm (11.221")

Figure 2-5 Screw Positions

Figure 2-6 Sub-Cover Slide-out

2.5 mm (0.098") -
3.5 mm (0.138")
180 mm
(7.087")
Sub-Cover
SL1100
2-5