6 Set up with the indicating and adjustment module PLICSCOM
Optional settings
46
Factory setting
Like basic adjustment, furthermore special parameters are reset to
default values.
7)
Pointer
The min. and max. temperature or pressure values are each reset to
the actual value.
Additional adjustment and diagnosis options such as e.g. scaling,
simulation or trend curve presentation are shown in the following menu
schematic. You will find a detailed description of these menu items in
the operating instructions manual "Indicating and adjustment module".
Special parameters are parameters which are set customer-specifically on
7)
the service level with the adjustment software PACTware.
VEGABAR 66 • 4 ... 20 mA/HART