System:information[:Instrument]:Identifier; System:information[:Instrument]:Locations; System:information[:Instrument]:Groups:user - Keysight Technologies J-BERT M8020A Programming Manual

5 SCPI Command Reference
462

:SYSTem:INFormation[:INSTrument]:IDENtifier?

Syntax :SYSTem:INFormation[:INSTrument]:IDENtifier?
Description This command returns a list of all identifiers defined in the system.
Example :SYST:INF:IDEN?
(M1.System,M1.SysInA,M1.DataIn1,M1.SysInB,M1.DataIn2,M1.CtrlInA,M1
.CtrlInB,M1.DataOut2,M1.Simulation1,M1.DataOut1,M1.ClkOut,M1.Simul
ation2,M1.ClkGen,M1.TrigOut,M1.SysOutA,M1.SysOutB,M1.CtrlOutA,M1.
RefClkOut,M2.DataOut2,M2.CtrlOutA,M2.DataOut1,M2.DataIn1,M2.CtrlIn
A,M2.DataIn2,M2.CtrlInB,M2.Simulation1,M2.Simulation2,M3.ClkOut,M3.
DataIn2,M3.DataOut,M3.ElectIdleIn,M3.DataIn1,M3.MuxMode,M3.DataIn)

:SYSTem:INFormation[:INSTrument]:LOCations?

Syntax :SYSTem:INFormation[:INSTrument]:LOCations?
Description This command returns a list of all locations defined in the system.
Example :SYST:INF:LOC?
(ClkGen,System,RefClkOut,TrigOut,SysOutA,SysOutB,CtrlOutA,SysInA,Sys
InB,CtrlInA,CtrlInB,DataIn1,DataIn2,DataOut1,DataOut2,Simulation1,Simu
lation2,MuxMode,ElectIdleIn)

:SYSTem:INFormation[:INSTrument]:GROups:USER?

Syntax :SYSTem:INFormation[:INSTrument]:GROups:USER?
Description This command returns a list of all user defined parameter group names
currently in use by the system.
Example :SYST:INF:GRO:USER?
(Outputs,Inputs)
Keysight M8070A Programming Guide