Keysight Technologies J-BERT M8020A Programming Manual page 416

5 SCPI Command Reference
Return Range
Return Range
416
This query returns the current setting.
This SCPI is applicable for M8041A, M8051A and M8062A.
Example :PLUG:EDI:SHOW:UNIT 'MyMeasurement', UNIT
:PLUGin:EDIagram:SHOW:WAVeform[?]
Syntax :PLUGin:EDIagram:SHOW:WAVeform 'Identifier', <0|1|OFF|ON>
:PLUGin:EDIagram:SHOW:WAVeform? 'Identifier'
Input Identifier: 'MyMeasurement'
Parameters
<0|1|OFF|ON>: Show/hide waveform
0|1
Description This command shows/hides the waveform. When this feature is enabled,
the waveform is displayed together with the contour lines. Disabling this
feature will only display contour lines, if available.
This query returns the current setting.
This SCPI is applicable for M8041A, M8051A and M8062A.
Example :PLUG:EDI:SHOW:WAV 'MyMeasurement', 1
:PLUGin:EDIagram:SHOW:WAVeform:SGRaph[?]
Syntax :PLUGin:EDIagram:SHOW:WAVeform:SGRaph 'Identifier', <0|1|OFF|ON>
:PLUGin:EDIagram:SHOW:WAVeform:SGRaph? 'Identifier'
Input Identifier: 'MyMeasurement'
Parameters
<0|1|OFF|ON>: Smooth waveform graphics.
0|1
Description This command smooths out the waveform graphics. When this feature is
enabled, the waveform is displayed together with the contour lines.
Disabling this feature will only display contour lines, if available.
This query returns the current setting.
This SCPI is applicable for M8041A, M8051A and M8062A.
Example :PLUG:EDI:SHOW:WAV:SGR 'MyMeasurement', 1
Keysight M8070A Programming Guide