S.R.Smith TURBOTWISTER Assembly And Installation Instructions Manual page 20

5. Glue assembled water supply pipe onto the 1-1/2"Ø PVC fitting at the top of the slide, as shown in
Figure T.
6. Secure the 1-1/2"Ø Flex Hose (18) to the ladder with the two 1-1/2"Ø Pipe Clamps (17) that were
installed previously in Step 4, on page 19.
7. Secure the 1-1/2"Ø Ball Valve (20) with two 2"Ø Pipe Straps (16). Install them with the #14 x 1" Pan
Head Tapping Screws (15), as shown in Figure U.
Figure T
Figure U
20