Table of Contents
Advertisement
IH32 Motherboard User Manual
2.2 I/O Equipment Installation
2.2.1 12V DC-IN
The Motherboard allows plugging in 12V DC-IN jack on the board without another
th
th
power module converter under power consumption by Intel® 4
/ 5
Generation
Core i5 4200U/ 5200U Processor.
2.2.2 Serial COM ports
Three RS-232 connectors build-in the rear I/O. One optional COM port supports
RS-422/485. When an optional touch-screen ordered with PPC, serial COM port can
be connected to a serial or an optional touch-screen. You can change serial COM port
setting through BIOS.
2.2.3 External HDMI
The Motherboard has one HDMI port that can be connected to an external LCD
monitor by HDMI cable, and it also needs to be connected to the outlet by power
cable. The HDMI connector is a standard 19-pin Type A connector.
2.2.4 Ethernet interface
The Motherboard is equipped with Intel® I211 Gigabit-LAN Controller + I218LM
Gigabit-LAN PHY which is fully compliant with the PCI 10/100/1000 Mbps Ethernet
protocol. It is supported by major network operating systems. The Ethernet ports
provide two standard RJ-45 jacks.
2.2.5 USB ports
Six USB devices (four with pin headers) can be connected to the system through an
adapter cable. Various adapters may come with USB ports. USB usually connected
the external system. The USB ports support hot plug-in connection. Whatever, you
should install the device driver before you use the device.
9
Advertisement
Table of Contents
