How Toset The Unit - ACME FURY LED RGB User Manual

4. How toset the unit

4.1Rear Panel
○
1 Display: To show the various menus and the selected functions
LED:
○
2 DMX
○
3 MASTER
○
4 SLAVE
○
5 SOUND
Button:
○
6 MENU
○
7 DOWN
○
8 UP
○
9 ENTER
○
10 Microphone：Receive music for the sound active.
○
11 DMX input: For DMX512 link, use 3/5-pin XLR plug cable to input DMX signal.
○
12 output：For DMX512 link, use 3/5-pin XLR plug cable to link the next unit.
○
13 Only for remote control：By connect to the 1/4'' microphone jack to control the unit for
○
14 Safety Ring：For attached the safety cable.
○
15 Mains output：Connect to supply mains power for the next unit.
○
16 Mains input：Connect to supply mains power.
On DMX input present
On Master Mode
On Slave Mode
Flashing Sound activation
To select the programming functions
To go backward in the selected functions
To go forward in the selected functions
To confirm the selected functions
Stand by, Function and Mode function.
4A