Bottom View - VQ Model TOMHAWK Instruction Manual

1- RETRACT LANDING GEAR
Trial fit the push rod into the wing. Join the pushrod to
the retract gear arm and trial fit the retract into the
wing.
After checking that the retract works smoothly,
fix the retract on the wing with 3x12mm
self tapping screws.
Do the same way with other half wing.
Retract push rod
2- RETRACT LANDING GEAR
5/32" (4mm) collar
............. 4
L/R
3- RETRACT LANDING GEAR
L/R
Retract push rod
Retract gear arm
Put the nylon ring

BOTTOM VIEW

BOTTOM VIEW
(3x10) screw
Steel clevis
To retract servo arm
Attach the wheels on the main gear wries with
11/64 in. I.D wheel collars
Be sure to adjust the stroke so that the landing gear
locks in both up and down position.
3x10mm screw
BOTTOM VIEW
X
3/32"
2mm
WING BOTTOM
7/8 in.
11/64 in.(4.2mm) I.D collar
Bend wire for
smooth retracting
....X 8