11
SERVICE WORK ON THE CHASSIS
11.31
Removing the main silencer
Warning
Danger of burns The exhaust system gets very hot when the vehicle is driven.
–
Allow the exhaust system to cool down before performing any work on the vehicle.
11.32
Installing the main silencer
Main work
–
Wash the air filter thoroughly in special cleaning liquid and allow it to dry properly.
Air filter cleaning agent (
Info
Only press the air filter to dry it, never wring it out.
–
Oil the dry air filter with a high quality filter oil.
Oil for foam air filter (
M01456-01
–
Clean the air filter box.
–
Check the intake flange for damage and looseness.
Finishing work
–
Install the air filter.
–
Mount the seat. (
Preparatory work
–
Remove the right side cover. (
Main work
–
Remove screw
–
Pull off the main silencer from the manifold at rubber sleeve
S01499-10
–
Mount the main silencer with the rubber sleeve
–
Position the wide collar bushing
S01502-10
–
Mount and tighten screw
Guideline
Remaining screws, chassis
S01503-10
p. 92)
p. 92)
(
p. 45)
p. 44)
p. 39)
.
and the narrow collar bushing
.
.
.
M6
10 Nm (7.4 lbf ft)
46
.