Checking The Front Brake Linings; Changing The Front Brake Linings - Husqvarna TC 65 Owner's Manual

12 BRAKE SYSTEM
12.6

Checking the front brake linings

Warning
Danger of accidents Worn-out brake linings reduce the braking effect.
–
Ensure that worn-out brake linings are replaced immediately. (Your authorized Husqvarna Motorcycles workshop will be
glad to help.)
12.7

Changing the front brake linings

Warning
Skin irritation Brake fluid causes skin irritation.
–
Keep brake fluid out of the reach of children.
–
Wear suitable protective clothing and safety glasses.
–
Do not allow brake fluid to come into contact with the skin, the eyes or clothing.
–
Consult a doctor immediately if brake fluid has been swallowed.
–
Rinse the affected area with plenty of water in the event of contact with the skin.
–
Rinse eyes thoroughly with water immediately and consult a doctor if brake fluid comes into contact with the eyes.
–
If brake fluid spills on to your clothing, change the clothing.
Warning
Danger of accidents Old brake fluid reduces the braking effect.
–
Make sure that brake fluid for the front and rear brake is changed in accordance with the service schedule. (Your autho-
rized Husqvarna Motorcycles workshop will be glad to help.)
Preparatory work
–
Check the front brake linings. (
Main work
–
Move the brake fluid reservoir mounted on the handlebar to a horizontal position.
–
Remove screws
–
Remove cover
E00556-10
–
Add brake fluid up to level
Guideline
Brake fluid level under top level of
container
Brake fluid DOT 4 (
–
Position the cover with the membrane. Mount and tighten the screws.
Info
309386-11
Clean up overflowed or spilled brake fluid immediately with water.
–
Check the brake linings for minimum thickness
Minimum thickness
» If the minimum thickness is less than specified:
–
Change the front brake linings.
–
Check the brake linings for damage and cracking.
» If damage or wear is encountered:
–
Change the front brake linings.
E00557-11
p. 59)

.
 
with membrane .

.
p. 90)

(
(
5 mm (0.2 in)

.
≥ 1 mm (≥ 0.04 in)
p. 59)
p. 59)
59