Recommended Work - Husqvarna TC 65 Owner's Manual

9 SERVICE SCHEDULE
9.3

Recommended work

Change the front brake fluid.
Change the rear brake fluid.
Change the hydraulic clutch fluid.
Grease the steering head bearing.
Service the fork.
Perform a shock absorber service.
Check/adjust the carburetor components.
Perform minor engine service. (Change the spark plug connector. Check the cylinder and piston. Check the
inlet membrane. Check the exhaust control for functioning and smooth operation.)
Perform major engine service including removing and installing engine. (Change the spring of the exhaust
control. Change the piston. Change the connecting rod, conrod bearing, and crank pin. Change the
crankshaft bearing. Check the transmission and shift mechanism. Change all engine bearings.)
●
Periodic interval
( p. 55)
( p. 37)
Every 80 operating hours
Every 40 operating hours
Every 20 operating hours
●
22
Annually
●
●
●
●
● ●
● ●
● ● ●
● ●
●