11
SERVICE WORK ON THE CHASSIS
11.24
Removing the shock absorber
11.25
Installing the shock absorber
Main work
–
Drill a hole at marking
Guideline
Diameter
S01543-10
Finishing work
–
Install the left side cover. (
Preparatory work
–
Raise the motorcycle with a lift stand. (
–
Remove the right side cover. (
–
Remove the main silencer. (
Main work
–
Remove screws
S01500-10
–
Take the brake line
–
Remove screw
without blocking the rear wheel. Secure the rear wheel in this position.
–
Remove screw
S01501-10
Main work
–
Position the shock absorber and mount and tighten screw
Guideline
Screw, top shock
absorber
–
Mount and tighten screw
Guideline
Screw, bottom shock
S01501-11
absorber
.
p. 42)
p. 31)
p. 39)
p. 46)
with bushings and splash protector
out of the holders.
and lower the rear wheel with the swingarm as far as possible
and shock absorber.
M10
.
M10
6.5 mm (0.256 in)
.
.
45 Nm
Loctite
(33.2 lbf ft)
Loctite
45 Nm
(33.2 lbf ft)
43
®
243™
243™
®