10
TUNING THE CHASSIS
–
Place the handlebar support in the required position. Mount and tighten
screws
.
Guideline
Screw, handlebar support
–
Position the handlebar.
Info
Make sure the cables and wiring are positioned correctly.
–
Position the handlebar clamps. Mount screws
Guideline
Screw, handlebar clamp
Info
Make sure the gap widths are even.
M10
40 Nm
(29.5 lbf ft)
and tighten evenly.
M8
30
Loctite
243™
®
20 Nm (14.8 lbf ft)