Husqvarna TC 65 Owner's Manual page 67

12 BRAKE SYSTEM
Warning
Danger of accidents Old brake fluid reduces the braking effect.
–
Make sure that brake fluid for the front and rear brake is changed in accordance with the service schedule. (Your autho-
rized Husqvarna Motorcycles workshop will be glad to help.)
Warning
Danger of accidents Incorrect maintenance will cause the brake system to fail.
–
Ensure that service work and repairs are performed professionally. (Your authorized Husqvarna Motorcycles workshop
will be glad to help.)
Warning
Environmental hazard Hazardous substances cause environmental damage.
–
Dispose of oils, grease, filters, fuel, cleaning agents, brake fluid, etc., correctly and in compliance with the applicable
regulations.
Info
Never use DOT 5 brake fluid. It is silicone-based and purple in color. Oil seals and brake lines are not designed for DOT 5
brake fluid.
Avoid contact between brake fluid and painted parts. Brake fluid attacks paint.
Only use clean brake fluid from a sealed container.
Preparatory work
–
Raise the motorcycle with a lift stand. (
Main work
–
Remove lock washer
–
Remove screw
E00551-10
–
Remove the brake linings.
–
Remove screws
Info
Cover the components to protect them against damage.
Do not kink the brake line.
–
Clean the brake caliper and brake caliper support.
E00550-10
–
Remove screws
–
Take off cover
–
Press the brake piston back to its basic position and make sure that no brake
fluid overflows from the brake fluid reservoir, extracting brake fluid if necessary.
–
Position the brake caliper.
–
Mount and tighten screws
Guideline
Screw, rear brake caliper
E00552-11

.

.

and take off the brake caliper.

.
 
with washer and membrane

.
M8
p. 31)

.
Loctite
18 Nm
(13.3 lbf ft)
65
® 243™