16
SERVICE WORK ON THE ENGINE
16.3
Adding gear oil
Info
Too little gear oil or poor-quality gear oil results in premature wear to the transmission.
Danger
Danger of poisoning Exhaust gases are toxic and inhaling them may
result in unconsciousness and death.
–
–
–
Start the engine and check that it is oil-tight.
Finishing work
–
Check the gear oil level. (
Preparatory work
–
Stand the motorcycle upright on a horizontal surface.
Main work
–
Remove screw
E00535-10
–
Remove filler plug
–
Add gear oil until it flows out of the hole of the gear oil level screw.
Engine oil (SAE 10W/40) (
–
Mount and tighten screw
Guideline
Screw, gear oil level check
–
Mount and tighten filler plug
E00533-10
Danger
Danger of poisoning Exhaust gases are toxic and inhaling them may
result in unconsciousness and death.
–
–
–
Start the engine and check that it is oil-tight.
Always make sure there is sufficient ventilation when running the
engine.
Use an effective exhaust extraction system when starting or running
the engine in an enclosed space.
p. 78)
.
.
p. 90)
.
.
Always make sure there is sufficient ventilation when running the
engine.
Use an effective exhaust extraction system when starting or running
the engine in an enclosed space.
M6
6 Nm (4.4 lbf ft)
79