Adjusting The Rebound Damping Of The Shock Absorber; Measuring The Rear Wheel Dimension Unloaded - Husqvarna TC 65 Owner's Manual

10 TUNING THE CHASSIS
10.6

Adjusting the rebound damping of the shock absorber

Caution
Risk of injury Parts of the shock absorber will fly off if the shock absorber is disassembled incorrectly.
The shock absorber is filled with highly compressed nitrogen.
–
Please follow the description provided. (Your authorized Husqvarna Motorcycles workshop will be glad to help.)
10.7

Measuring the rear wheel dimension unloaded

–
Turn adjusting screw
–
Turn counterclockwise by the number of clicks corresponding to the shock
absorber type.
Guideline
Rebound damping
Comfort
Standard
Sport
S01476-10
Info
Turn clockwise to increase damping; turn counterclockwise to reduce
damping.
Preparatory work
–
Raise the motorcycle with a lift stand. (
Main work
–
Measure a distance between the rear axle and marking SAG as vertically as pos-
sible, on the rear fender.
–
Note down the value as dimension
402415-10
Finishing work
–
Remove the motorcycle from the lift stand. (

clockwise up to the last perceptible click.
8 clicks
5 clicks
2 clicks
p. 31)

.
p. 31)
25