Icom IC-R1500 Instruction Manual page 20

4
MEMORY OPERATION
D D To indicate the channel name
The channel name indication can be set for independent
memory channels.
q Select the desired memory channel.
➥ Push [MR•SKIP] several times to select memory mode,
then rotate [DIAL] to select the desired memory channel.
• "!" and memory channel number blink.
e Push [SET•LOCK] to enter set mode.
rPush [SET•LOCK] or [S.MW•MW] several times to select
"ANM" item.
tRotate [DIAL] to turn the memory name indication ON.
y Push [TS•MODE] to exit set mode.
NOTE: When no memory name is programmed, the stored
frequency is displayed.
15
[