Memory Channels ....... 12; Memory Bank Selection; Memory Clear - Icom IC-R2 Instruction Manual

5
MEMORY CHANNELS

Memory bank selection

The receiver has 400 memory channels in 8 banks for stor-
age of often-used frequencies.
q Select memory mode with [V/M].
w Rotate [DIAL] while pushing [FUNC] to select the desired
memory banks.
• "1" – "3" indicate memory banks 1 to 3; " " indicates memory
bank 4; " 1" – " 3" indicate memory banks 5 to 7; no bank indi-
cator indicates memory bank 0.
e Rotate [DIAL] to select the desired memory channel.
FM
MR
Memory bank 0
[EXAMPLE]: Clearing memory channel 3 (memory bank 0).
V/M MW
Select memory
channel
14
FM FM
MR
Memory bank 1 Memory bank 7
FM FM
V/M MW
MR

Memory clear

Unwanted memory channels can be cleared (erased). Before
clearing a memory channel make sure it is no longer needed
as cleared memories cannot be recalled.
q Select memory mode with [V/M].
w Set the memory channel to be cleared with [DIAL].
• Rotate [DIAL] while pushing [FUNC] to select a memory bank or
programmed scan edge channel.
e Select VFO mode with [V/M] and push [FUNC] + [
momentarily to indicate the selected memory channel.
• Do not hold [FUNC] + [
wise the selected memory channel will be overwritten.
r Push [FUNC] + [
lected memory channel.
MR
• 3 beeps sound, then the frequency is cleared.
t Push [V/M] to return to VFO mode.
FUNC
+
V/M MW
FM
momentarily
MW] for more than 0.5 sec., other-
(V/M)
LOCK] for 2 sec. to clear the se-
(MODE)
FUNC
+
MODE LOCK
for 2 sec.
MR
MW]
(V/M)
V/M MW
MR