I Scan Resume Condition; Scan Operation - Icom IC-R1500 Instruction Manual

I Scan resume condition

The scan resume condition can be selected as timer or pause
scan. The selected resume condition is also used for priority
watch. (p. ??)
q Push [SET•LOCK] to enter set mode.
w Push [SET•LOCK] or [S.MW•MW] several times until
"SCT" or "SCP" appears as shown above.
• When "d" is displayed in place of the 100 MHz digit, cancel the
DTMF memory encoder in advance. (p. ??)
e Rotate [DIAL] to set the desired timer:
• "SCP-2" : Scan pauses until the signal disappears and then re-
sumes 2 sec. later.
• "SCT-15" : Scan pauses 15 sec. while receiving a signal.
• "SCT-10" : Scan pauses 10 sec. while receiving a signal.
• "SCT-5" : Scan pauses 5 sec. while receiving a signal.
r Push [TS•MODE] to exit set mode.
[

SCAN OPERATION

5
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
24