Table of Contents
Advertisement
User's Guide
Placing Originals
Place originals on the scanner glass or the ADF. Use the scanner glass for originals that the ADF does not support.
You can scan multiple originals and both sides of the originals at the same time with the ADF.
Available Originals for the ADF
Available Paper Sizes
Paper Type
Paper Thickness (Weight of Paper)
Loading Capacity
*
Only single-sided scanning is supported.
To prevent paper jams, avoid placing the following originals in the ADF. For these types, use the scanner glass.
❏ Originals that are torn, folded, wrinkled, deteriorated, or curled
❏ Originals with binder holes
❏ Originals held together with tape, staples, paper clips etc.
❏ Originals that have stickers or labels stuck to them
❏ Originals that are cut irregularly or not right angled
❏ Originals that are bound
❏ OHPs, thermal transfer paper, or carbon backs
Placing Originals on the ADF
1. Align the edges of the originals.
Placing Originals
*
*
A4, A5
, B5, Legal
, Letter
Plain paper
64 to 95 g/m2
Except for Legal: 30 sheets or 3 mm
Legal: 10 sheets
47
Advertisement
Table of Contents
