Epmp 1000 Antenna Requirements; Epmp 1000 Connectorized Radio With Sync, Antennas And Antenna Cabling; Epmp 1000 Fcc And Ic Approved Antennas - Cambium Networks ePMP 1000 User Manual

Epmp series
Hide thumbs Also See for ePMP 1000:
Table of Contents

Advertisement

EPMP 1000 CONNECTORIZED RADIO WITH SYNC, ANTENNAS AND ANTENNA
CABLING
Connectorized modules require external antennas connected using RF cable (included with
Cambium ePMP sector antennas). For details of the antennas and accessories required for a
connectorized ePMP installation, see:
ePMP 1000 Antenna

ePMP 1000 FCC and IC approved antennas

EPMP 1000 ANTENNA REQUIREMENTS

For connectorized units operating in the USA or Canada 2.4 GHz, 5.2 GHz, 5.4 GHz or 5.8 GHz
bands, choose external antennas from those listed in
on page 53. For installations in other countries, the listed antennas are advisory, not mandatory.
EPMP 1000 FCC AND IC APPROVED ANTENNAS
For connectorized units operating in the USA or Canada, choose external antennas from
These are approved by the FCC for use with the product and are constrained by the following
limits:
5 GHz – 15 dBi gain
2.4 GHz - 15 dBi gain
Caution
Using other than approved antennas may cause measurements higher than reported for certification.
This radio transmitter (IC certification number 109W-0005) has been approved by Industry Canada to
operate with the antenna types listed below with the maximum permissible gain and required
antenna impedance for each antenna type indicated. Antenna types not included in this list, having a
gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this
device.
Le présent émetteur radio (Numéro de certification IC 109W-0005) a été approuvé par Industrie
Canada pour fonctionner avec les types d'antenne énumérés ci-dessous et ayant un gain admissible
maximal et l'impédance requise pour chaque type d'antenne. Les types d'antenne non inclus dans
cette liste, ou dont le gain est supérieur au gain maximal indiqué, sont strictement interdits pour
l'exploitation de l'émetteur.
Table 19 ePMP 1000 Allowed antennas for deployment in USA/Canada
Cambium part
Antenna Type
number
C050900D021A
5 GHz Sector Antenna – 90/120 degree
C050900D003A
5 GHz Sector Antenna – 90 degree
C050900D002A
5 GHz Sector Antenna – 120 degree
C024900D004A
2.4 GHz Sector Antenna - 90 /120 degree
026v003
requirements on page
53
on page
CAMBIUM NETWORKS
53
ePMP 1000 FCC and IC approved antennas
Gain (dBi)
18
15
15
15
Table 19.
53

Advertisement

Table of Contents
loading

This manual is also suitable for:

Epmp 2000Epmp

Table of Contents