Subscribe to Our Youtube Channel
Related Manuals for Cambium Networks cnPilot Enterprise Series
Summary of Contents for Cambium Networks cnPilot Enterprise Series
- Page 1 Easy e xtensions o f W iFi c overage cnPilot Mesh ePMP1000 Hotspot, cnPilot E400, ...
- Page 2 Overview cnPilot Enterprise series of WiFi access points support wireless mesh allowing the user to easily extend the range of their network and to cover areas where a cable run might be hard to do. Users can also mix and match device types, so a link is also allowed between a cnPilot E400 AP and an ePMP1000 Hotspot.
- Page 3 Once either of the two mesh options is selected, the rest of the WLAN configuration items for this WLAN are hidden as they are not applicable, and the GUI will only display the parameters applicable to mesh: Copyright 2 016. C ambium N etworks I nc. A ll r ights r eserved. 3 ...
- Page 4 In the CLI the configuration commands are same as the ones used for WLAN. The additional CLI command is to enable mesh inside the WLAN context. (cnWest-E400)# wireless wlan 1 (cnWest-E400)# mesh client Mesh W LAN One Wireless LAN has to be dedicated to Mesh, and the SSID on that wireless LAN will be used by the radios to identify each other and form the connection.
- Page 5 Status The mesh configuration status (off/client/base) of a radio is available in the dashboard of the device GUI: In addition, the status of each link with details such as the signal strength are also seen on the device dashboard: Copyright ...
Need help?
Do you have a question about the cnPilot Enterprise Series and is the answer not in the manual?
Questions and answers