Cable Grounding Kit; Antennas And Antenna Cabling; Antenna Requirements - Cambium Networks PMP 450 Series Installation Manual

Caution
To provide adequate protection, all grounding cables must be a minimum size of
2
10 mm csa (8AWG), preferably 16 mm
Table 79 :DC LPU and grounding kit part number
Cambium description
DC LPU and Grounding Kit
Cab le g round ing kit
Copper drop cable shields must be bonded to the grounding system in order to prevent lightning-strike
arcing (resulting in fire risk and damage to equipment).
One grounding kit (Cable grounding kit) is required for each grounding point on the cable. Order cable
grounding kits from Cambium Networks (LPU and grounding kit part number).
Figure 38 :

Cable grounding kit

Table 80 :Cable grounding kit part numbers
Cambium description
Cable Grounding Kits For 1/4" And 3/8" Cable 01010419001
A nt ennas and ant enna cab ling
A nt enna req uirem ent s
Each connectorized ODU requires one external antenna (normally dual-polar).
For connectorized units operating in the USA or Canada 900 MHz, 4.9 GHz, 5.1 GHz, 5.2 GHz, 5.4 GHz or
5.8 GHz bands, choose external antennas which are recommended by Cambium Networks. Do not install
any other antennas.
Chapter 2: System hardware
2
csa (6AWG), or 25 mm
Cambium part number
C000000L114A
Cambium part number
2
csa (4AWG).
106