Installing A Ugps Antenna; Installing A Single Controller - Cambium Networks PMP 450i User Manual

PMP Synchronization Solutions User Guide

Installing a uGPS Antenna

Please refer to 4-16 for instructions on installing a uGPS antenna. Note that the CMM5
Injector provides power to the uGPS.

Installing a Single Controller

Perform the following procedure to install a single CMM5 Controller:
Procedure 1 Installing the Controller
1
Ensure that the following hardware is available:
•
•
•
2
Use 4 mounting screws to secure the mounting ear to the Controller.
PMP-0297 007v001 (January, 2017)
(2) standard mounting ears for a 19-inch rack
(2) spacers
(4) mounting screws for each mounting ear
Installing the CMM5
2-37