Antennas And Antenna Cabling; Antenna Requirements; Supported External Ap Antennas; Supported External Bh/Sm Antenna - Cambium Networks PMP 450 AP Planning And Installation Manual

Chapter 2: System hardware

Antennas and antenna cabling

Antenna requirements

Each connectorized ODU requires one external antenna (normally dual-polar).
For connectorized units operating in the USA or Canada 900 MHz, 4.9 GHz, 5.1 GHz, 5.2 GHz, 5.4 GHz or
5.8 GHz bands, choose external antennas which are recommended by Cambium Networks. Do not install
any other antennas.

Supported external AP antennas

The recommended AP external antennas are listed in

Table 58 List of AP external antennas

Cambium description
900 MHz 13 dBi 65 degree Sector Antenna (Dual Slant)
5 GHz Horizontal and Vertical Polarization Antenna for 90 Degree
Sector
5 GHz Horizontal and Vertical Polarization Antenna for 60 Degree
Sector
Note
LINKPlanner, Cambium Networks, planning tool, contains an up-to-date, exhaustive list of
antennas that can be used with Cambium Products.

Supported external BH/SM antenna

The recommended PTP 450i Series BH or PMP 450/450i Series SM external antenna is listed in
59.

Table 59 PTP 450i Series BH or PMP 450/450i Series SM external antenna

Cambium description
900 MHz 12 dBi gain directional antenna (Dual Slant)
Table 58.
Cambium part number
N009045D003A
2-50
Page
Antennas and antenna cabling
Cambium part number
N009045D001A
85009324001
85009325001
Table