Delete Character(S) On Output Result - Inateck P6 User Manual

4.4. Delete Character(s) on Output Result

Inateck P6 can help users delete 0 to 99 digits of both the beginning and the ending
characters before outputs result. As default setting, no character, or 0 digit being deleted
as output result. More details are as below.
1) Scan "Enter Setup" Barcode
2) Scan "Delete Beginning Character(s)" Barcode or "Delete Ending Character(s)" Barcode
Delete Beginning Character(s)
3) Scan the digit(s)barcode to be deleted (If 13 characters need be deleted, please scan
the barcodes of 1 digit and then 3 digits. ).
(*) 0 digit
2 digits
4 digits
6 digits
8 digits
Enter Setup
72
Delete Ending Character(s)
1 digit
3 digits
5 digits
7 digits
9 digits