3.10.3. Start Character Transmission
Decide whether to include the Start character, which is limited to be "0"or "1", in the data
being transmitted. Inateck P6 defaults "Transmit UPC-E Start Characters".
(*) Transmit UPC-E Start Character
Do Not Transmit UPC-E Start
Character
Enter Setup
Exit with Save
Exit without Save
Operations are as below if you do not want to Transmit UPC-E Start Characters:
1. Read the "Enter Setup" barcode;
2. Read the " Do Not Transmit UPC-E Start Character " barcode;
3. Read the "Exit with Save" barcode.
56