Auto Sleep Mode - Inateck P6 User Manual

1.1.3. Auto Sleep Mode

In order to conserve battery power, user can specify the time interval for the scanner to
automatically turn off. By default, it is set to be 3 minutes.
1 min
5 min
E g.: Steps to set 5 minutes for the scanner to be automatically turn off are as below:
1. Read the "Enter Setup" barcode;
2. Read the "Enter Auto Sleep mode" barcode;
3. Read the "5min" barcode;
4. Read the "Exit with Save" barcode.
Enter Setup
Enter Auto sleep mode
5 min
Exit with Save
15
(*) 3 min
10 min