Code; Enable/Disable Code - Inateck P6 User Manual

3.4. Code 39

3.4.1. Enable/Disable Code 39

Decide whether to enable Code 39. Inateck P6 Scanner defaults "Enable Code 39".
(*) Enable Code 39 Disable Code 39
Enter Setup Exit with Save
Exit without Save
Note: Read the "Disable Code 39" barcode will make the scanner unable to read the Code
39 barcode. Thus, if the scanner cannot read the Code 39 barcode, please try to scan
"Enable Code 39" to reset.
For Example: Steps to enable Code 39 are as below:
1. Read the "Enter Setup" barcode;
2. Read the "Enable Code 39" barcode;
3. Read the "Exit with Save" barcode.
35