Checksum Verification - Inateck P6 User Manual

3.10.5. Checksum Verification

Decide whether to transmit UPC-E Checksum by scanning correspondent barcode below.
Inateck P6 defaults "Transmit UPC-E Checksum".
(*) Transmit UPC-E Checksum Do Not Transmit UPC-E Checksum
Enter Setup Exit with Save
Exit without Save
Operations are as below if you want to transmit UPC-E Checksum:
1. Read the "Enter Setup" barcode;
2. Read the "Enable UPC-E" barcode;
3. Read the "Transmit UPC-E Checksum" barcode;
4. Read the "Exit with Save" barcode.
58