Code - Inateck P6 User Manual

3.4.6. Code 32

Code 32, usually applied to Italian medical products, is a special form of Code 39. Inateck
P6 defaults "Disable Code 32".
Enable Code 32
Enter Setup
Exit without Save
Operations are as below if you want to enable Code 32:
1. Read the "Enter Setup" barcode;
2. Read the "Enable Code 32" barcode;
3. Read the "Exit with Save" barcode.
The first character of Code 32 is fixed to be "A". Decide whether to output the first
character of Code 32 via selecting correspondent barcode to scan. Inateck P6 defaults
"Disable first character of Code 32".
Enable first character of Code 32
Enter Setup
Exit without Save
(*) Disable first character of Code 32
40
(*) Disable Code 32
Exit with Save
Exit with Save