Upc-A; Enable / Disable Upc-A - Inateck P6 User Manual

3.9. UPC-A

3.9.1. Enable / Disable UPC-A

Decide whether to enable UPC-A barcode by scanning correspondent barcode below.
Inateck P6 defaults "Disable UPC-A barcode".
Enable UPC-A (*) Disable UPC-A
Enter Setup Exit with Save
Exit without Save
Operations are as below if you want to enable UPC-A barcode:
1. Read the "Enter Setup" barcode;
2. Read the "Enable UPC-A " barcode;
3. Read the "Exit with Save" barcode.
51