3.14. Standard 2 of 5 / Industrial 2 of 5
Standard 2 of 5 is also known as Industrial 2 of 5.
3.14.1. Enable / Disable Standard 25
Decide whether to enable Standard 25 by scanning correspondent barcode below.
Inateck P6 defaults to "Disable Standard 25".
Enable Standard 25
(*) Disable Standard 25
Enter Setup
Exit with Save
Exit without Save
Operations are as below if you want to enable Standard 25:
1. Read the "Enter Setup" barcode;
2. Read the "Enable Standard 25" barcode;
3. Read the "Exit with Save" barcode.
64