Advertisement
Connect the base to а computer via the included USB саblе and the bluе LED on the base will turn on when the power is connected. The base can receive signals from the barcode scanner and bе used to charge the scanner.
When the trigger is pressed, the barcode scanner will turn on and connect the base automatically.
Note:
(*) Wireless Base Mode
The scanner is synched to the base. Connect the base to а computer via the included USB cable and the bluе LED on the base will turn on when the power is connected. The base сап receive signals from the barcode scanner and bе used to charge the scanner.
Note: lf you receive an error during data transfer via the wireless connection, please scan the setting barcodes in sequence to reconnect the scanner to the base: "Enter to setup" --- "Wireless Base Mode" ---"Save and Exit'.
(*) Wireless Base Mode
Wired Mode
Connect the scanner to а computer via the USB cable. BCST-54 will transmit data via the USB cable to your computer even though it once works via the wireless base or Bluetooth.
Bluetooth Mode(HID)
The Bluetooth mode (HID) is not the default mode. То enter this mode, please scan the setting barcodes in sequence: "Enter to setup" ---"Bluetooth Pairing (HID mode) " -- "Save and Exit'.
Bluetooth Paring HID Mode)
System Setting
Keyboard Setting
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Download Inateck BCST-54 - 2D Wireless Bluetooth Barcode Scanner with Smart Base Manual
Advertisement
Thank you! Your question has been received!
Need Assistance?
Do you have a question about the BCST-54 that isn't answered in the manual? Leave your question here.