Toyota PRIUS Owner's Manual page 98

98
1-4. Theft deterrent system
■
When the message asking if you wish to cancel the intrusion sensor is
not displayed
The message may not be displayed if other message is displayed. In this
case, turn the power switch to ON mode, follow the instructions on the display
and turn the power switch off again.
■
Canceling and automatic re-enabling of the intrusion sensor
●
The alarm will still be set even when the intrusion sensor is canceled.
●
After the intrusion sensor is canceled, pressing the power switch or unlock-
ing the doors using the entry function or wireless remote control will re-
enable the intrusion sensor.
● The intrusion sensor will automatically be re-enabled when the alarm sys-
tem is deactivated.
■
Intrusion sensor detection considerations
The sensor may trigger the alarm in the following situations:
●
People or pets are in the vehicle.
●
A side window or moon roof (if
equipped) is open.
In this case, the sensor may detect the
following:
• Wind or the movement of objects
such as leaves and insects inside the
vehicle
• Ultrasonic
devices such as the intrusion sensors
of other vehicles
• The movement of people outside the vehicle
●
Unstable items, such as dangling acces-
sories or clothes hanging on the coat
hooks, are in the vehicle.
PRIUS_OM_OM47A31E_(EE)
waves emitted from