Toyota PRIUS Owner's Manual page 431

When a level beep is emit-
3
ted and the stop indicator
(→P. 419) is shown on the
display, stop the vehicle.
When the shift position is changed to R, a high-pitched beep is
4
emitted and assist control will start.
● When the steering wheel auto operation starts, the steering
wheel auto operation display (→P. 419) and assistance level
indicator (→P. 419) will be shown in the display area.
● To stop assist control, press the S-IPA switch.
Assume an ordinary posture for backing up, rest your hands
5
lightly on the steering wheel without applying any force, directly
confirm the safety of the area to the rear and around the vehicle,
confirm that there are no obstacles in the parking space, and
slowly back up while adjusting your speed by depressing the
brake pedal.
● When backing up too quickly, a sharp beeping sound is emit-
ted and assist control is stopped.
● When the vehicle cannot be cleanly entered within the target
parking spot on the first try and multi-turn maneuvering is nec-
essary, proceed to step
When multi-turn maneuvering is not necessary, proceed to
step
PRIUS_OM_OM47A31E_(EE)
4-5. Using the driving support systems
6
.
12
.
431
4