Toyota PRIUS Owner's Manual page 420

420
4-5. Using the driving support systems
■
S-IPA indicator inside the meter (→P. 115)
This indicator illuminates when the steering wheel auto operation is being
performed by the Simple Intelligent Parking Assist System. After control
ends, the indicator blinks for a short period of time and then turns off.
■
Clearance sonar pop-up display
While the Simple Intelligent Parking Assist System is operating, if the clear-
ance sonar function detects an obstacle, the clearance sonar display auto-
matically pops up on the guidance screen (→P. 391), regardless of whether
the clearance sonar function is ON or OFF (→P. 390).
Canceling or stopping assist mode
Assist mode will be canceled or stopped in the following cases.
Assist control is canceled when
■
● The system temperature preservation function operates
● There is a system malfunction
● System determined that the parking environment is not suitable
for assist to continue
When assist control is canceled, firmly grasp the steering wheel,
depress the brake pedal and stop the vehicle.
Start again from the beginning, as the system will already be can-
celed. When continuing to park manually, operate the steering
wheel as you normally would.
Assist control is stopped when
■
● The steering wheel is operated
● The vehicle speed is too high
● The Intelligent Clearance Sonar function operates
When assist control is stopped, it can be resumed by following the
guidance shown on the screen.
PRIUS_OM_OM47A31E_(EE)