Toyota PRIUS Owner's Manual page 310

310
4-5. Using the driving support systems
Changing settings of the pre-crash safety system
Enabling/disabling the pre-crash safety system
■
The pre-crash safety system can be enabled/disabled on
(→P. 152) of the multi-information display.
The system is automatically enabled each time the power switch is
turned to ON mode.
If the system is disabled, the
PCS warning light will turn on.
Changing the pre-crash warning timing
■
The pre-crash warning timing can be changed on
of the multi-information display.
The operation timing setting is retained when the power switch is turned
off.
Far
1
The warning will begin to oper-
ate earlier than with the default
timing.
Middle
2
This is the default setting.
Near
3
The warning will begin to oper-
ate later than with the default
timing.
PRIUS_OM_OM47A31E_(EE)
(→P. 152)