Toyota PRIUS Owner's Manual page 97

Intrusion sensor (if equipped)
The intrusion sensor detects intruders or movement in the vehicle.
This system is designed to deter and prevent vehicle theft but does
not guarantee absolute security against all intrusions.
■ Setting the intrusion sensor
The intrusion sensor will be set automatically when the alarm is set.
(→P. 94)
Canceling the intrusion sensor
■
If you are leaving pets or other moving things inside the vehicle,
make sure to disable the intrusion sensor before setting the alarm,
as they will respond to movement inside the vehicle.
Turn the power switch off.
1
A message is displayed on the multi-information display for approxi-
mately 4 seconds asking if you wish to cancel the intrusion sensor.
Press
2
meter control switch on the
steering wheel, select "Yes"
and then press
If an operation is not performed
for approximately 5 seconds,
the message will be automati-
cally extinguished and the intru-
sion sensor will not be canceled.
The intrusion sensor will revert to on each time the power switch is
turned to ON mode.
PRIUS_OM_OM47A31E_(EE)
or of the
.
1-4. Theft deterrent system
97
1