Toyota PRIUS Owner's Manual page 335

●
The speed information displayed on the meter and that displayed on the
Navigation system (if equipped) may be different due to the Navigation sys-
tem using map data.
■
When driving vehicle in country with different speed unit
Since RSA recognizes signs based on the set unit of the meter, it is neces-
sary to change the set unit of the meter. Adjust the set unit of the meter to the
speed unit of signs in the current location. (→P. 672)
■
Speed limit sign display
If the power switch was last turned off while a speed limit sign was displayed
on the multi-information display, the same sign displays again when the
power switch is turned to ON mode.
■
Customization
The settings for warning display, warning buzzer
old, etc., can be changed.
(Customizable feature: →P. 672)
*
: If a speed limit with supplemental mark is exceeded, the warning buzzer
does not operate.
PRIUS_OM_OM47A31E_(EE)
4-5. Using the driving support systems
*
, speeding warning thresh-
335
4