Quidway S2700 Series Ethernet Switches
Configuration Guide - Multicast
No.
2
3
4.3.2 Enabling MLD snooping on the S2700
Context
To enable MLD snooping globally, do as follows on the S2700.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
mld-snooping enable
MLD snooping is enabled globally.
By default, MLD snooping is disabled on the S2700.
----End
4.3.3 Enabling MLD Snooping in a VLAN
Context
To enable MLD snooping in a VLAN, do as follows on the S2700.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
vlan vlan-id
The VLAN view is displayed.
Step 3 Run:
mld-snooping enable
Issue 01 (2011-07-15)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 MLD Snooping Configuration
Data
Number of the static member interface to be
configured, ID of the VLAN to which the
interface is to be added, and multicast IPv6
address
Number of the static router interface to be
configured, and ID of the VLAN to which the
interface is to be added
53